Page 14
Page 14
Emerging Organic Pollutants in Waste Waters and Sludge
Over the past fifteen years regulatory agencies have relied on their approaches to characterise and control the release of toxic substances into the aquatic environment: a GC/MS analysis for U.S. EPA designated 126 priority pollutants and 132 dangerous substances according to the European 76/464/CEE Directive and on the bioassays with aquatic bioorganisms. "Emerging Contaminants" correspond in most cases to irregulated contaminants, e.g. surfactants, pharmaceuticals and personal care products (PPCP), or gasoline additives. These two volumes, 5/I and 5/O, of this Handbook deal with the analytical, toxicological and environmental issues of these toxicants. Based on results of up-to-date research they give the reader a balanced view on this rapidly developing and complex subject.
Emerging Environmental Technologies
This book exclusively focuses on the technologies that would be in the forefront in near to far future. Each and every article in the book discusses the current environmental challenges, the novel innovation and future directions. The topics covered in the book include microbial fuel cells, hybrid solar lighting, bacterial swimming for environmental remediation, cleaner engines, nanoparticles for effluent treatment, surface catalysis and proteins as gas hydrates inhibitors.
Emerging Directions in Embedded and Ubiquitous Computing ; EUC 2007 Workshops: TRUST, WSOC, NCUS, UUWSN, USN, ESO, and SECUBIQ, Taipei, Taiwan, December 1-4, 2007, Proceedings
This volume contains discuss and exchange state-of-the-art research results and experience, case studies and on-going research activities in the areas of embedded and ubiquitous computing, networking and communications.
Emerging Directions in Embedded and Ubiquitous Computing ; EUC 2006 Workshops : NCUS, SecUbiq, USN, TRUST, ESO, and MSA, Seoul, Korea, August 1-4, 2006, Proceedings
Constitutes the refereed proceedings of the EUC 2006 workshops, held in conjunction with the IFIP International Conference on Embedded and Ubiquitous Computing in Seoul, Korea, August 2006.
Embedded Firmware Solutions : Development Best Practices for the Internet of Things
Embedded Firmware Solutions is the perfect introduction and daily-use field guide--for the thousands of firmware designers, hardware engineers, architects, managers, and developers--to Intel’s new firmware direction (including Quark coverage), showing how to integrate Intel® Architecture designs into their plans. Featuring hands-on examples and exercises using Open Source codebases, like Coreboot and EFI Development Kit (tianocore) and Chromebook, this is the first book that combines a timely and thorough overview of firmware solutions for the rapidly evolving embedded ecosystem with in-depth coverage of requirements and optimization.
Elements of Multinational Strategy
Integrates the academic study of international trade and foreign direct investment with the actual strategic and operational decisions of exporters and multinational enterprises.
Electronic vs. Floor Based Trading
Historically, specialists and other floor brokers, in direct contact on the trading floor, have been at the heart of operations at the national U.S. equity exchanges. At the other end of the spectrum, electronic trading platforms have characterized most other equity markets globally for many years. Recent developments at the NYSE have moved in this direction, but fundamental questions effecting market quality remain. Can the unique services offered by the floor be provided as effectively in an electronic environment? Which environment would institutional and retail traders each find most suitable to their special needs? Which environment offers better price and quantity discovery? These are some of the questions that are addressed in this book, while providing perspective on the future direction that exchange market structure is likely to follow in the coming years.
Elastic Multibody Dynamics : A Direct Ritz Approach
This textbook is an introduction to and exploration of a number of core topics in the field of applied mechanics: On the basis of Lagrange's Principle, a Central Equation of Dynamics is presented which yields a unified view on existing methods. From these, the Projection Equation is selected for the derivation of the motion equations of holonomic and of non-holonomic systems. The method is applied to rigid multibody systems where the rigid body is defined such that, by relaxation of the rigidity constraints, one can directly proceed to elastic bodies. A decomposition into subsystems leads to a minimal representation and to a recursive representation, respectively, of the equations of motion.
EKC2008 Proceedings of the EU-Korea Conference on Science and Technology
Current research fields in science and technology were presented and discussed at the EKC2008, informing about the interests and directions of the scientists and engineers in EU countries and Korea. The Conference has emerged from the idea of bringing together EU and Korea to get to know each other better, especially in fields of science and technology.
E-government and public sector process rebuilding : Dilettantes, wheel Barrows, and Diamonds
E-government and Public Sector Process Rebuilding: Dilettantes, Wheelbarrows, and Diamonds provides an input to rebuild and improve the processes in which the public sector perform activities and interact with the citizens, companies, and the formal elected decision-makers. Through eleven chapters, the book emphasizes information systems (IS) as the vehicle for redirecting the public sector towards its key customers. The book stresses serious capability challenges inhibiting the digital transformation using activity and customer centric applications.
eDirectory Field Guide
eDirectory Field Guide is a handy reference for configuring, troubleshooting, and optimizing Novells eDirectory on NetWare, Linux, Unix, and Windows. Along with Sun ONE Directory Server and Microsoft Active Directory, Novells eDirectory is a leader in directory server software, the specialized database that enterprises employ to store user identities. This book offers tips for migrating from one operating system to another. iMonitor, troubleshooting, and administration tools (such as Novell's iManager and ConsoleOne) are discussed in detail.
Economics: Complex Windows
This volume contains papers that provide an analysis of topics in the following areas: Agent Based Models, Non-linear Time Series Analysis, Financial Market Dynamics, Econo-physics, Deterministic Chaos, Macroeconomic Dynamics. Economics: Complex Windows, does not present contributions to the sterile debate as to the merits of the different grand, or potentially grand paradigms of economics. Rather it offers a balanced collection of methodological advances which can be applied to concrete economic problems. Starting with a presentation of the "complexity approach" to economics, it goes on to provide a collection of applications to areas such as the analysis of market imperfections, risk assessment, non-linear dynamics, forecasting and highly irregular fluctuations. The tools used help to provide a clearer understanding and a more accurate analysis of these areas of economics. They also highlight the gulf which exists between current economic theory and real economic practice. The basic idea is to encourage economic researchers to embrace a more open and pragmatic approach to economics rather than to reluctantly move in this direction as if it were somehow a betrayal of established dogma. We hope, in this way, to open up avenues which will lead to progress beyond the "holy trinity", (rationality, equilibrium and greed) of modern economics.
Economic evolution and equilibrium : Bridging the gap
This work uses various model frameworks to study the evolution of equilibria in an open loop evolving economy in which the model characteristics evolve without any directional restrictions except for continuity.
Ecological and Genetic Implications of Aquaculture Activities
Aquaculture is a rapidly growing industry and aquaculture practices can directly interact with and depend upon the surrounding environment. Therefore, the effects of all types of aquaculture on living natural resources and ecosystems are of significant and increasing national and international interest. In Ecological and Genetic Implications of Aquaculture Activities, numerous nationally and internationally prominent aquaculture researchers contribute 27 chapters that comprise overviews of aquaculture effects on the environment, discussions of genetic considerations, thorough documentation of aquaculture effects and their solutions specific to countries, and approaches toward environmentally sustainable aquaculture. Together, these chapters comprise a comprehensive synthesis of many ecological and genetic problems implicated in the practice of aquaculture and of many proven, attempted, or postulated solutions to those problems. Many chapters can serve as benchmark documentations of specific aquaculture effects on biodiversity at different levels.
Early Aspects: Current Challenges and Future Directions ; 10th International Workshop, Vancouver, Canada, March 13, 2007, Revised Selected Papers
Traditionally, aspect-oriented software development (AOSD) has focused on the implementation phase of the software lifecycle: aspects are identified and captured mainly in code. Therefore, most current AOSD approaches place the burden for aspect identification and management on the programmer working at low levels of abstraction. However, aspects are often present well before the implementation phase, such as in domain models, requirements and software architecture. Identification and capture of these early aspects ensure that aspects related to the problem domain (as opposed to merely the implementation) will be appropriately captured, reasoned about and available. This offers improved opportunities for early recognition and negotiation of trade-offs and allows forward and backward aspect traceability. This makes requirements, architecture, and implementation more seamless, and allows a more systematic application of aspects.
Dynamics of Fibre Formation and Processing : Modelling and Application in Fibre and Textile Industry
The book deals with the modelling of steady state and non-steady state basic processes of fibre formation and fibre processing. Focal points are melt spinning processes (polymers and glass, drawing, spunbonded nonwoven), spun yarn spinning processes (drafting, carding) and the description of the dynamics in different process steps during the fibre processing (fibre transport, fibre heating and cooling, false twist texturing). A special chapter deals with dynamics of tensile force (measuring and evaluation possibilities) and its importance for the process stability. All presented examples are based on industrial practice and give the reader a direct imagination of the discussed problems. The results are explained in a userfriendly way and give the practitioner the possibility to optimize his or her own processing.
Dynamics beyond uniform hyperbolicity : A global geometric and probabilistic perspective
In broad terms, the goal of dynamics is to describe the long-term evolution of systems for which an ""infinitesimal"" evolution rule, such as a differential equation or the iteration of a map, is known.This book aims to put such recent developments in a unified perspective, and to point out open problems and likely directions for further progress. It is aimed willing to get a quick, yet broad, view of this part of dynamics. Main ideas, methods, and results are discussed, at variable degrees of depth, with references to the original works for details and complementary information.
Dynamic Analysis of Petri Net-Based Discrete Systems
Design of modern digital hardware systems and of complex software systems is almost always connected with parallelism. For example, execution of an object-oriented p- gram can be considered as parallel functioning of the co-operating objects; all modern operating systems are multitasking, and the software tends to be multithread; many complex calculation tasks are solved in distributed way. But designers of the control systems probably have to face parallelism in more evident and direct way. Controllers rarely deal with just one controlled object. Usually a system of several objects is to be controlled, and then the control algorithm naturally turns to be parallel. So, classical and very deeply investigated model of discrete device, Finite State Machine, is not expressive enough for the design of control devices and systems. Theoretically in most of cases behavior of a controller can be described by an FSM, but usually it is not convenient; such FSM description would be much more complex, than a parallel specification (even as a network of several communicating FSMs).
Drug-Induced Oral Complications
Provides detailed information on the prevalence and manifestations of the most important oral complications associated with different drug treatments, focusing especially on recently developed therapies. Among the diverse adverse drug reactions covered are gingival overgrowth, ulcerations, lichenoid reactions, pigmentation, and bullous reactions. The potential direct toxic effects on bone of drugs that prevent bone mass loss, such as bisphosphonates and denosumab, are fully examined, as is the occurrence of spontaneous oral bleeding in patients receiving antithrombotic therapies. Further chapters focus on drug-induced taste disorders and salivary gland disturbances, including xerostomia, swelling, and hypersalivation. The enhanced risk of oral infections when using chemotherapy and biotherapy is addressed, and the closing chapter examines drug-related perioral and facial complications. This book is a collaborative work that brings together clinicians, surgeons, and specialists in drug safety surveillance.
Drug delivery aspects : Expectations and realities of multifunctional drug delivery systems ; Vol.4 : Expectations and realities of multifunctional drug delivery systems
Reviews additional features of drug delivery systems, along with the standard formulation development, like preclinical testing, conversion into solid dosage forms, roles of excipients and polymers used on stability and sterile processing. There is a focus on formulation engineering and related large scale (GMP) manufacturing, regulatory, and functional aspects of drug delivery systems. A detailed discussion on biologics and vaccines gives insights to readers on new developments in this direction.
