Page 1
Page 1
Vlsi-Soc : From systems to silicon ; IFIP TC10/ WG 10.5 13th International Conference on very large scale integration of system on chip (VLSI-SoC2005), October 17-19, 2005, Perth, Australia
The IFIP series publishes state-of-the-art results in the sciences and technologies of information and communication. The scope of the series includes: foundations of computer science; software theory and practice; education; computer applications in technology; communication systems; systems modeling and optimization; information systems; computers and society; computer systems technology; security and protection in information processing systems; artificial intelligence; and human-computer interaction. Proceedings and post-proceedings of referred international conferences in computer science and interdisciplinary fields are featured. These results often precede journal publication and represent the most current research. The principal aim of the IFIP series is to encourage education and the dissemination and exchange of information about all aspects of computing.
Trends in Intelligent Systems and Computer Engineering
This volume addresses the demand for theories and applications of intelligent systems and computer engineering to meet the needs of rapidly developing high technologies.Topics covered in this book include: - Automated Planning - Expert Systems - Machine Learning - Fuzzy Systems - Knowledge-based Systems - Computer Systems Organization - Computing Methodologies
The Once-Only Principle : The TOOP Project
This Book State-of-the-Art Survey describes and documents the developments and results of the Once-Only Principle Project (TOOP). The Once-Only Principle (OOP) is part of the seven underlying principles of the eGovernment Action Plan 2016-2020. It aims to make the government more effective and to reduce administrative burdens by asking citizens and companies to provide certain standard information to the public authorities only once. The project was horizontal and policy-driven with the aim of showing that the implementation of OOP in a cross-border and cross-sector setting is feasible. The book summarizes the results of the project from policy, organizational, architectural, and technical points of view. This book has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 737460
Smart home control system using FPGA
In recent years, Home Automation has seen a rapid introduction of network enabled digital technologies. These technologies offer new and exciting opportunities to increase the connectivity of devices within the home for the purpose of Home Automation. In this paper, the design and implementation of a remote-controlled home automation system is presented. The design has been described using HDL (Hardware Description Language) and implemented in hardware using FPGA (Field Programmable Gate Array).
Reversible Computation ; 12th International Conference, RC 2020, Oslo, Norway, July 9-10, 2020, Proceedings
This book constitutes the refereed proceedings of the 12th International Conference on Reversible Computation, RC 2020, held in Oslo, Norway, in July 2020. The 17 full papers included in this volume were carefully reviewed and selected from 22 submissions. The papers are organized in the following topical sections: theory and foundation; programming languages; circuit synthesis; evaluation of circuit synthesis; and applications and implementations.
Rapid Prototyping of Digital Systems : SOPC ed.
RAPID PROTOTYPING OF DIGITAL SYSTEMS provides an exciting and challenging environment for rapidly adapting System-on-a-Programmable Chip (SOPC) technology to existing designs or integrating the new design methods into a laboratory component for digital logic, computer and embedded-design curriculums. New to this edition is an introduction to embedded operating systems for SOPC designs. Featuring four accelerated tutorials on the Quartus II and Nios II design environments, this edition progresses from introductory programmable logic to full-scale SOPC design seamlessly integrating hardware implementation, software development, operating system support, state-of-the-art I/O, and IP cores.
Rapid Prototyping of Digital Systems : Quartus® II ed.
The more advanced topics and exercises also make this text useful for upper level courses in digital logic, programmable logic, and embedded systems. This new version of the widely used Rapid Prototyping of Digital Systems, Second Edition, now uses Altera's new Quartus II CAD tool and includes laboratory projects for Altera's UP 2 and the new UP 3 FPGA board.
Processor Design : System-On-Chip Computing for ASICs and FPGAs
Processor Design addresses the design of different types of embedded, firmware-programmable computation engines. Because the design and customization of embedded processors has become a mainstream task in the development of complex SoCs (Systems-on-Chip), ASIC and SoC designers must master the integration and development of processor hardware as an integral part of their job. Even contemporary FPGA devices can now accommodate several programmable processors. There are many different kinds of embedded processor cores available, suiting different kinds of tasks and applications.
OpenMP : Portable multi-level parallelism on modern systems ; 16th International Workshop on OpenMP, IWOMP 2020, Austin, TX, USA, September 22–24, 2020, Proceedings
This book constitutes the proceedings of the 16th International Workshop on OpenMP, IWOMP 2020, held in Austin, TX, USA, in September 2020. The conference was held virtually due to the COVID-19 pandemic. The 21 full papers presented in this volume were carefully reviewed and selected for inclusion in this book. The papers are organized in topical sections named: performance methodologies; applications; OpenMP extensions; performance studies; tools; NUMA; compilation techniques; heterogeneous computing; and memory.
Molecular Electronics Materials, Devices and Applications
another goal of Molecular Electronics Materials, Devices and Applications is also to promote a practical approach. As a starting point for future developments, a pragmatic methodology for VHDL-AMS device modelling and circuit design based on experimental data is then proposed. It includes an original fault tolerant memory architecture based on molecular electronics.
High-Level Synthesis : From Algorithm to Digital Circuit
This book presents an excellent collection of contributions addressing different aspects of high-level synthesis from both industry and academia. High-Level Synthesis: from Algorithm to Digital Circuit should be on each designer’s and CAD developer’s shelf, as well as on those of project managers who will soon embrace high level design and synthesis for all aspects of digital system design.
Fundamentals of switching theory and logic design : A hands on approach
Switching theory and logic design provide mathematical foundations and tools for digital system design that is an essential part in the research and development in almost all areas of modern technology. The vast complexity of modern digital systems implies that they can only be handled by computer aided design tools that are built on sophisticated mathematical models. Fundamentals of Switching Theory and Logic Design is aimed at providing an accessible introduction to these mathematical techniques that underlie the design tools and that are necessary for understanding their capabilities and limitations.
Fine- and Coarse-Grain Reconfigurable Computing
The FPGA technology is defined, which includes architecture, logic block structure, interconnect, and configuration methods and existing fine-grain reconfigurable architectures emerged from both academia and industry. Additionally, the implementation techniques and CAD tools developed to facilitate the implementation of a system in reconfigurable hardware by the industry and academia are provided.
Fault-Tolerance Techniques for SRAM-Based FPGAs
This book discusses fault-tolerance techniques for SRAM-based Field Programmable Gate Arrays (FPGAs). It starts by showing the model of the problem and the upset effects in the programmable architecture. In the sequence, it shows the main fault tolerance techniques used nowadays to protect integrated circuits against errors. A large set of methods for designing fault tolerance systems in SRAM-based FPGAs is described. Some presented techniques are based on developing a new fault-tolerant architecture with new robustness FPGA elements. Other techniques are based on protecting the high-level hardware description before the synthesis in the FPGA.
Embedded Systems -- Modeling, Technology, and Applications ; Proceedings of the 7th International Workshop held at Technische Universität Berlin, June 26/27, 2006
This book synthesizes the results of the seventh in a successful series of workshops that were established by Shanghai Jiao Tong University and Technische Universitat Berlin, bringing together researchers from both universities in order to present research results to an international community.
Embedded Computer Systems : Architectures, Modeling, and Simulation; 20th International Conference, SAMOS 2020, Samos, Greece, July 5–9, 2020, Proceedings
This book constitutes the refereed proceedings of the 20th International Conference on Embedded Computer Systems: Architectures, Modeling, and Simulation, SAMOS 2020, held in Samos, Greece, in July 2020.* The 16 regular papers presented were carefully reviewed and selected from 35 submissions. In addition, 9 papers from two special sessions were included, which were organized on topics of current interest: innovative architectures for security and European projects on embedded and high performance computing for health applications.
Digital VLSI Systems Design : A Design Manual for Implementation of Projects on FPGAs and ASICs Using Verilog
The book presents new material and theory as well as synthesis of recent work with complete Project Designs using industry standard CAD tools and FPGA boards, enabling the serious readers to design VLSI Systems on their own. The reader is taken step by step through the design right from implementing a single digital gate to a massive design consuming well over 100,000 gates. The Verilog codes developed for these designs are universal and can work on any FPGA or ASIC and are technology independent. The book presents the development of novel algorithms and architectures for optimum realization of high tech. products. All the design codes developed in this book are Register Transfer Level (RTL) compliant and can be readily used or amended to suit new projects.
Digital Signal Processing with Field Programmable Gate Arrays
Field-Programmable Gate Arrays (FPGAs) are revolutionizing digital signal processing as novel FPGA families are replacing ASICs and PDSPs for front-end digital signal processing algorithms. So the efficient implementation of these algorithms is critical and is the main goal of this book. It starts with an overview of today's FPGA technology, devices, and tools for designing state-of-the-art DSP systems. A case study in the first chapter is the basis for more than 40 design examples throughout. The following chapters deal with computer arithmetic concepts, theory and the implementation of FIR and IIR filters, multirate digital signal processing systems, DFT and FFT algorithms, advanced algorithms with high future potential, and adaptive filters. Each chapter contains exercises. The VERILOG source code and a glossary are given in the appendices. This edition has a new chapter on microprocessors, new sections on special functions using MAC calls, intellectual property core design and arbitrary sampling rate converters, and over 100 new exercises.
Designing Embedded Processors : A Low Power Perspective
Designing Embedded Processors examines the many ways in which processor based systems are designed to allow low power devices. It looks at processor design methods, memory optimization, dynamic voltage scaling methods, compiler methods, and multi processor methods. Each section has an introductory chapter to give a breadth view, and have a few specialist chapters in the area to give a deeper perspective. The book provides a good starting point to engineers in the area, and to research students embarking upon the exciting area of embedded systems and architectures.
Design of Systems on a Chip : Design and Test
Design of Systems on a Chip: Design&Test is the second of two volumes addressing the design challenges associated with new generations of the semiconductor technology. The various chapters are the compilations of tutorials presented at workshops in the recent years by prominent authors from all over the world. Technology, productivity and quality are the main aspects under consideration to establish the major requirements for the design and test of upcoming systems on a chip. In particular this second book include contributions on three different, but complementary axes: core design, computer-aided design tools and test methods. A collection of chapters deal with the heterogeneity aspect of core designs, showing the diversity of parts that may share the same substrate in a state-of-the-art system on a chip.
