Page 8
Page 8
Integrated Circuit and System Design. Power and Timing Modeling, Optimization and Simulation ; Vol. 4148 ; 16th International Workshop, PATMOS 2006, Montpellier, France, September 13-15, 2006, Proceedings
Welcome to the proceedings of PATMOS 2006, the 16th in a series of international workshops. PATMOS 2006 was organized by LIRMM with CAS technical - sponsorship and CEDA sponsorship. Over the years, the PATMOS workshop has evolved into an important European event, where researchers from both industry and academia discuss and investigate the emerging challenges in future and contemporary applications, design methodologies, and tools required for the development of upcoming generations of integrated circuits and systems. The technical program of PATMOS 2006 contained state-of-the-art technical contributions, three invited talks, a special session on hearing-aid design, and an embedded tutorial. The technical program focused on timing, performance and power consumption, as well as architectural aspects with particular emphasis on modeling, design, characterization, analysis and optimization in the nanometer era. The Technical Program Committee, with the assistance of additional expert reviewers, selected the 64 papers presented at PATMOS. The papers were organized into 11 technical sessions and 3 poster sessions. As is always the case with the PATMOS workshops, full papers were required, and several reviews were received per manuscript.
Integrated Circuit and System Design. Power and Timing Modeling, Optimization and Simulation ; Vol. 3728 ; 15th International Workshop, PATMOS 2005, Leuven, Belgium, September 21-23, 2005, Proceedings
Welcome to the proceedings of PATMOS 2005, the 15th in a series of international workshops.PATMOS2005wasorganizedbyIMECwithtechnicalco-sponsorshipfrom the IEEE Circuits and Systems Society. Over the years, PATMOS has evolved into an important European event, where - searchers from both industry and academia discuss and investigate the emerging ch- lenges in future and contemporary applications, design methodologies, and tools - quired for the developmentof upcominggenerationsof integrated circuits and systems. The technical program of PATMOS 2005 contained state-of-the-art technical contri- tions, three invited talks, a special session on hearing-aid design, and an embedded - torial. The technical program focused on timing, performance and power consumption, as well as architectural aspects with particular emphasis on modeling, design, char- terization, analysis and optimization in the nanometer era. The Technical Program Committee, with the assistance of additional expert revi- ers, selected the 74 papers to be presented at PATMOS. The papers were divided into 11 technical sessions and 3 poster sessions. As is always the case with the PATMOS workshops, the review process was anonymous, full papers were required, and several reviews were carried out per paper. Beyond the presentations of the papers, the PATMOS technical program was - riched by a series of speeches offered by world class experts, on important emerging research issues of industrial relevance. Prof. Jan Rabaey, Berkeley, USA, gave a talk on “Traveling the Wild Frontier of Ulta Low-Power Design”, Dr. Sung Bae Park, S- sung, gave a presentation on “DVL (Deep Low Voltage): Circuits and Devices”, Prof.
Integral waterproofing of concrete structures : Advanced protection technologies of concrete by pore blocking and lining
This book first establishes a background about concrete structures and porosity linked with concrete hydration, then goes on to consider concrete durability problems from the perspective of water penetration including damages from freeze-thaw cycles, alkali silica reactions, and chloride ion penetration. The mechanisms, applications, performances, and limitations of waterproofing technologies including coatings and integral systems are compared. The book also showcases all application methods of crystallization waterproofing materials, including material spray on cured concrete and on fresh concrete, and their addition to concrete mix designs as enhancers or admixtures.
Integral bridges : a fundamental approach to the time–temperature loading problem
In recent years, integral bridges have become increasingly popular in the UK. The Highways Agency standard now requires, where possible, that all new bridges with a length of less than sixty metres should be of integral form. In addition, it has been found that, due especially to the problems and costs associated with failed expansion joints, integral bridges are not only cost effective but also have a longer lifespan. Integral Bridges was commissioned by the Highways Agency to produce guidance for bridge designers by addressing the thermally induced soil/structure interaction problem created by environmental changes of temperature and the associated cyclical displacements imposed on the granular backfill to the bridge abutments. It develops a better theoretical understanding of the cyclic performance, in particular the strain racheting in the backfill soil when in contact with a stiff structure. It also identifies the governing soil parameters and examines their influence in the interaction problem, develops numerical modelling procedures to predict interactive soil behaviour, and identifies and quantifies the controlling features of bridge structures relevant to the interaction problem.
Intangible capital and growth : Essays on labor productivity, monetary economics, and political economy ; Vol.1
It is now widely recognized that intangible capital has been a crucial element in the growth performance of these economies and their firms. In the author's view, “intangible capital” serves as the most appropriate umbrella term for capturing several dimensions of capital that are not tangible in nature but are nevertheless fundamentally important for growth. The term encompasses investments in education (human capital) and in informal (social capital) and formal (rule of law) institutions by the public sector and households, as well as investments by businesses aimed at enhancing their knowledge base, such as software, innovative property, and economic competencies.
Insurance intermediation : An economic analysis of the information services market
Insurance intermediaries can help consumers to economize on information and transaction costs in insurance markets. However, competing intermediaries provide heterogeneous information services, which are difficult to assess by incompletely informed consumers. Conduct and performance in the market for insurance information services are analyzed by applying search theoretical and industrial organization approaches. Based on a sample of 927 insurance intermediaries, the factors that affect the quality of the information services provided by them are studied empirically. The results obtained support the main hypotheses derived from industrial organization theories as to the poor working of quality competition under incomplete and asymmetric information on the side of consumers.
Instrumaster
Experiments with different neural network structures and algorithms in order to achieve musical note recognition as well as musical instrument recognition, all bundled in a mobile application. It also aims to create the most effective music-learning application that works completely offline, which is hard to find in modern music applications. The paper also explores why the instrument identifying AI is solely based on Multi-Layer Perceptron (MLP) and why the note-identifying AI system was chosen to be a ML system over CNN or other deep-learning trained AI. The paper presents feature extraction methods for audio signals and files and dives deep into the process, such as FFT, MFCCs, Wavelengths, sampling rates, etc. It also touches on Logistic Regression Algorithms, their limitations, and their performance with the different use cases in the application. All these techniques are then compared side by side for maximally added value, making this research paper a good reference for any future developers looking to find optimal neural networks techniques when it comes to audio processing and analysis.
Inside deep learning : Math, algorithms, models
Journey through the theory and practice of modern deep learning, and apply innovative techniques to solve everyday data problems. In Inside Deep Learning, you will learn how to: Implement deep learning with PyTorch Select the right deep learning components Train and evaluate a deep learning model Fine tune deep learning models to maximize performance Understand deep learning terminology Adapt existing PyTorch code to solve new problems Inside Deep Learning is an accessible guide to implementing deep learning with the PyTorch framework. It demystifies complex deep learning concepts and teaches you to understand the vocabulary of deep learning so you can keep pace in a rapidly evolving field. No detail is skipped--you'll dive into math, theory, and practical applications. Everything is clearly explained in plain English.
Innovative Tools and methods using BIM for an efficient renovation in buildings
This book describes a BIM-based toolkit that has been developed according to the latest research activities on building information modelling and semantic interoperability to optimize the building process. It highlights the impacts of using such new tools to fast renovation activities starting from the decision-making and design stages to the construction site management with the possibility to monitor occupants' and owners’ feedback during the realization process. In this process, a framework has been developed and implemented to allow stakeholders involved in a renovation project to efficiently compile, maintain, and add data about (i) building elements, (ii) building services systems, (iii) tenants, operators, and owners of the building, and (iv) current and predicted performance of the building from the various data sources available. The framework applies and specializes the existing practices in the Semantic Web, Linked Data, and ontology domain to the management of renovation projects. It has been designed to be open so that any system which implements the required functions and uses the specified conventions will be able to achieve semantic interoperability with other framework-compliant systems in the renovation domain. Finally, this book represents the validation process of the toolkit that has been held in three demo sites: a social housing building in Italy and two private residential buildings in Poland and Finland. The outcome shows that the toolkit facilitates the renovation process with relevant reductions of time, costs, and energy consumption and that the inhabitants can take advantage of the increase in building performances, quality, and comfort.
Innovative Superhard Materials and Sustainable Coatings for Advanced Manufacturing ; Proceedings of the NATO Advanced Research Workshop on Innovative Superhard Materials and Sustainable Coating, Kiev, Ukraine,12 - 15 May 2004.
Modern industry imposes ever increasing requirements upon tools and tool materials as to the provision for performance under the conditions of high cutting speeds and dynamic loads as well as under intensive thermal and chemical interactions with workpiece materials. The industry demands a higher productivity in combination with the accuracy of geometry and dimensions of workpieces and quality of working surfaces of the machined pieces. These requirements are best met by the tool superhard materials (diamond and diamond-like cubic boron nitride). Ceramics based on silicon carbide, aluminum and boron oxides as well as on titanium, silicon and aluminum nitrides offer promise as tool materials. Tungsten-containing cemented carbides are still considered as suitable tool materials. Hi- hardness and high strength composites based on the above materials fit all the requirements imposed by machining jobs when manufacturing elements of machinery, in particular those operating under the extreme conditions of high temperatures and loads.
Innovations in Macroeconomics ; 2nd ed.
Modern macroeconomics suffers from an unclear link between short-term Keynesian analysis and long-term growth modelling. Moreover, product and process innovations have been only partially integrated. The analysis suggests new approaches to innovations in open economies in many ways, including the Schumpeterian Mundell-Fleming model and new monetary growth models. A specific focus is on the role of innovations for output, employment and exchange rate developments. A new link between monetary analysis and growth modelling in open economies is presented. Structural change, innovations and growth are considered from a new perspective. This important new book sets a new direction for macroeconomics. By linking several strands of fundamental economic thinking into a coherent, integrated framework it provides a pathbreaking understanding into the fundamental forces shaping macroeconomic performance.
Innovation, Industrial Dynamics and Structural Transformation : Schumpeterian Legacies
This book provides an account of work in the Schumpeterian and evolutionary tradition of industrial dynamics and the evolution of industries. It is shown that over time industries evolve and change their structure. In this dynamic process change is affected and sometimes constraint by many factors: knowledge and technologies, the capabilities and incentives of actors, new products and processes, and institutions. All these elements and their relations drive innovative activities and affect economic performance in an industry. Investigations into these complex phenomena show a deep interdependence between empirical work delivering a rich account of regularities and stylized facts in the structure of industries and their change, and theoretical analyses ranging from appreciate theorizing to formal modeling.
Innovation in manufacturing networks ; 8th IFIP International Conference on information technology for balanced automation systems, Porto, Portugal, June 23–25, 2008
The IFIP series publishes state-of-the-art results in the sciences and technologies of information and communication. The scope of the series includes: foundations of computer science; software theory and practice; education; computer applications in technology; communication systems; systems modeling and optimization; information systems; computers and society; computer systems technology; security and protection in information processing systems; artificial intelligence; and human-computer interaction. Proceedings and post-proceedings of refereed international conferences in computer science and interdisciplinary fields are featured.
Innovation and Firm Performance : An Empirical Investigation for German Firms
The process of firms’ growth – in terms of productivity or employment – is a major concern of policy makers. In this context, innovations are considered to play a crucial role in stimulating firms’ performance. This book investigates this general hypothesis by looking at three topics: 1. Does innovation lead to an increase in employment growth? 2. Does innovation boost labour productivity? 3. Does innovation in one period improve innovation performance in subsequent periods? Based on a comprehensive innovation panel dataset for German firms, this book presents detailed results for each question, in particular by separating the effects induced by new products from those induced by the introduction of new production technologies. From a theoretical point of view, amongst others, a new multi-product model has been developed to study employment effects.
Innovation and Export : The Joint Challenge of the Small Company
This book proposes a joint diagnostic tool for SMEs, highlighting good practices to be mastered in order to simultaneously improve innovation and export performance, in the form of a virtuous circle. Innovation and Export focuses on the integration of innovation and export into the strategic management of SMEs, for which the use of synergies is a powerful lever to overcome any difficulties in mobilizing significant resources.
Infrastructure for Agents, Multi-Agent Systems, and Scalable Multi-Agent Systems ; International Workshop on Infrastructure for Scalable Multi-Agent Systems, Barcelona, Spain, June 3-7, 2000 Revised Papers
Building research grade multi-agent systems usually involves a broad variety of software infrastructure ingredients like planning, scheduling, coordination, communication, transport, simulation, and module integration technologies and as such constitutes a great challenge to the individual researcher active in the area. The book presents a collection of papers on approaches that will help make deployed and large scale multi-agent systems a reality. The first part focuses on available infrastructure and requirements for constructing research-grade agents and multi-agent systems. The second part deals with support in infrastructure and software development methods for multi-agent systems that can directly support coordination and management of large multi-agent communities; performance analysis and scalability techniques are needed to promote deployment of multi-agent systems to professionals in software engineering and information technology.
Information theory and machine learning
The recent successes of machine learning, especially regarding systems based on deep neural networks, have encouraged further research activities and raised a new set of challenges in understanding and designing complex machine learning algorithms. New applications require learning algorithms to be distributed, have transferable learning results, use computation resources efficiently, convergence quickly on online settings, have performance guarantees, satisfy fairness or privacy constraints, incorporate domain knowledge on model structures, etc. A new wave of developments in statistical learning theory and information theory has set out to address these challenges.
Information technology for balanced manufacturing systems ; IFIP TC 5, WG 5.5 7th International Conference on information technology for balanced automation systems in manufacturing and services, Niagra Falls, Ontario, Canada, September 4-6, 2006
International Federation for Information Processing The IFIP series publishes state-of-the-art results in the sciences and technologies of information and communication. The scope of the series includes: foundations of computer science; software theory and practice; education; computer applications in technology; communication systems; systems modeling and optimization; information systems; computers and society; computer systems technology; security and protection in information processing systems; artificial intelligence; and human-computer interaction. Proceedings and post-proceedings of referred international conferences in computer science and interdisciplinary fields are featured. These results often precede journal publication and represent the most current research. The principal aim of the IFIP series is to encourage education and the dissemination and exchange of information about all aspects of computing.
Information Systems Development : Advances in Theory, Practice, and Education
Comprised of the proceedings of the 13th International Conference on Information Systems Development held August 26th-28th, 2004, at Vilnius Gediminas Technical University, Vilnius, Lithuania. This volume aims to provide a forum for the research and practices addressing issues associated with Information Systems Development (ISD).
Information hiding ; Vol. 3727 ; 7th International workshop, IH 2005, Barcelona, Spain, June 6-8, 2005, Revised selected papers
Constitutes the refereed post-proceedings of the 7th International Workshop on Information Hiding, IH 2005, held in Barcelona, Spain in June 2005. This book features the papers that are organized in topical sections on anonymity, watermarking, theory, watermark attacks, steganography, hiding in unusual content, steganalysis, and fingerprinting.
