الصفحة 1
الصفحة 1
Modeling Solid Oxide Fuel Cells : Methods, Procedures and Techniques
The volume is structured in two parts. Part one presents the basic theory, and the general equations describing SOFC operation phenomena. Part two deals with the application of the theory to practical examples, where different SOFC geometries, configurations (from single cells to hybrid systems), operating conditions (steady-state and dynamic), and different phenomena (e.g. performance, temperature and chemical species, and mechanical stress distribution) are analyzed in detail.
Model-based Process Supervision : A Bond Graph Approach
Model-based fault detection and isolation requires a mathematical model of the system behaviour. Modelling is important and can be difficult because of the complexity of the monitored system and its control architecture. The authors use bond-graph modelling, a unified multi-energy domain modelling method, to build dynamic models of process engineering systems by composing hierarchically arranged sub-models of various commonly encountered process engineering devices. The structural and causal properties of bond-graph models are exploited for supervisory systems design.
Mini-Micro Fuel Cells : Fundamentals and Applications
This volume contains an archival record of the NATO Advanced Institute on Mini – Micro Fuel Cells – Fundamental and Applications held in Çesme – Izmir, Turkey, July 22–August 3, 2007. The ASIs are intended to be a high-level teaching activity in scientific and technical areas of current concern. In this volume, the reader may find interesting chapters on Mini- Micro Fuel Cells with fundamentals and applications. In recent years, fu- cell development, modeling and performance analysis has received much attention due to their potential for distributed power which is a critical issue for energy security and the environmental protection.
Microscale and Nanoscale Heat Transfer
Constitutes a particularly complete and original collection of ideas, models, numerical methods and experimental tools which will prove invaluable in the study of microscale and nanoscale heat transfer. It should be of interest to research scientists and thermal engineers who wish to carry out theoretical research or metrology in this field, but also to physicists concerned with the problems of heat transfer, or teachers requiring a solid foundation for an undergraduate university course in this area.
Introduction to Physics and Chemistry of Combustion : Explosion, Flame, Detonation
Most of the material covered in this book deals with the fundamentals of chemistry and physics of key processes and fundamental mechanisms for various combustion and combustion-related phenomena in gaseous combustible mixture. It provides the reader with basic knowledge of burning processes and mechanisms of reaction wave propagation
International steam tables : Properties of water and steam based on the industrial formulation IAPWS-IF97 : Tables, algorithms, diagrams, and CD-ROM Electronic steam tables - All of the equations of IAPWS-IF97 including a complete set of supplementary backward equations for fast calculations of heat cycles, boilers, and steam turbines
This book contains steam tables for industrial use that have been calculated using the international standard for the thermodynamic properties of water and steam, the IAPWS-IF97 formulation, and the international standards for transport and other properties. In addition, the complete set of equations of IAPWS-IF97 is presented including all supplementary backward equations adopted by IAPWS between 2001 and 2005 for fast calculations of heat cycles, boilers, and steam turbines.
Interfacial Convection in Multilayer Systems
This book contains a systematic investigation of the convection in systems with interfaces. For the first time, it classifies all of the known types of convective instabilities in such systems, and discusses the peculiarities of multilayer systems. The book provides an overview of the wide variety of steady and oscillatory patterns, waves, and other dynamic phenomena characteristic for multilayer fluid systems. Various physical effects, including heat and mass transfer, thermal and mechanical couplings on the interfaces, interfacial deformability, the influence of surfactants on different types of convective motions are investigated.
Heat Conduction : Mathematical Models and Analytical Solutions
Many phenomena in social, natural and engineering fields are governed by wave, potential, parabolic heat-conduction, hyperbolic heat-conduction and dual-phase-lagging heat-conduction equations. The focus of the present monograph is on these equations: their solution structures, methods of finding their solutions under various supplementary conditions, as well as the physical implication and applications of their solutions.
Heat and Mass Transfer
This comprehensive textbook provides readers with a firm foundation in the principles of heat and mass transfer and shows them how to solve problems by applying modern methods. The basic theory is developed systematically, and the solution methods to all important problems are covered in detail. The second edition incorporates state-of-the-art findings on heat and mass transfer correlations. Therefore, this book will be useful not only to upper- and graduate-level students, but also to practicing scientists and engineers. Many worked-out examples and numerous exercises with their solutions will facilitate learning and understanding, and an appendix includes data on key properties of important substances.
Free Convection Film Flows and Heat Transfer
This book presents recent developments in systematic studies of hydrodynamics and heat and mass transfer in laminar free convection, accelerating film boiling and condensation of Newtonian fluids, as well as accelerating film flow of non-Newtonian power-law fluids (FFNF). A novel system of analysis models is provided with a developed velocity component method, instead of traditional Falkner-Skan type transformation, and a system of models for treatment of variable thermophysical properties is presented with an innovative temperature parameter method that makes it easier to similarly treat related governing differential equations for consideration of fluid variable thermophysical properties. A pseudo-similarity method is applied for dealing with thermal boundary layer of FFNF, furthermore, with an induced local Prandtl number, which greatly simplifies the heat-transfer analysis and numerical calculation.
Emerging Topics in Heat and Mass Transfer in Porous Media : From Bioengineering and Microelectronics to Nanotechnology
This book provides a unique collection of articles reviewing the state-of-the-art in the field of heat and mass transfer in porous media with particular emphasis to emerging technologies, from bioengineering and bio-tissues and microelectronics to nanotechnology.
Drying of Porous Materials
This book provides recent advances in research on drying of saturated particulates and porous materials. The present volume is based on the selected papers presented at the XI Polish Drying Symposium 2005. The selected contributions cover theoretical modeling as well as experimental research on heat and mass transfer in porous and multiphase media during drying. The comprehensiveness and profound treatment of the subject makes this book an excellent pioneering contribution to the science and technology of drying of particulate solids.
Drying and wetting of building materials and components
Discusses important topics of heat and mass transfer in particulate materials Includes a set of new developments in the science of drying and wetting processes Fosters the encounter of a variety of scientific and engineering disciplines
Convective and Advective Heat Transfer in Geological Systems
This monograph aims to provide state-of-the-art theoretical results in a systematic treatment of convective and advective heat transfer during fluid flow in geological systems at the crustal scale. Although some numerical results are provided to complement theoretical ones, the main focus of this monograph is on theoretical aspects of the topic. The theoretical treatment contained in this monograph is also applicable to a wide range of problems of other length-scales such as engineering length-scales.
Chemical Reactor Modeling : Multiphase Reactive Flows
Chemical Reactor Modeling closes the gap between Chemical Reaction Engineering and Fluid Mechanics. It presents the fundamentals of the single-fluid and multi-fluid models for the analysis of single- and multiphase reactive flows in chemical reactors with a chemical reactor engineering rather than mathematical bias.
Building Physics : Heat, Ventilation, Moisture, Light, Sound, Fire, and Urban Microclimate
Presents the theoretical background of building physics, dealing with the evaluation of physical phenomena related to heat transfer and energy use in buildings, water and water vapour transfer in building structures, daylighting and electric lighting of buildings, sound transmission in building structures and protection against noise, the occurrence and spread of fires in buildings and the thermal response of cities. It contains numerical and computational evaluation methods, numerous computational case studies and examples of experimental analyses. The book demonstrates that the considered physical processes affect the quality of living and working comfort in indoor and outdoor environment.
