الصفحة 2
الصفحة 2
Handbook of contact mechanics : Exact solutions of axisymmetric contact problems
This book contains a structured collection of complete solutions of all significant axially symmetric contact problems. It provides solutions for classical profiles such as the sphere, cone or flat cylindrical punch as well as a multitude of other technically relevant shapes, e.g. the truncated cone, the worn sphere, rough profiles, hollow cylinders, etc. Normal, tangential and torsional contacts with and without adhesion are examined. Elastically isotropic, transversally isotropic, viscoelastic and functionally graded media are addressed. The solutions of the contact problems cover the relationships between the macroscopic quantities of force and displacement, the contact configuration as well as the stress and displacement fields at the surface and in some cases within the half-space medium. The solutions are obtained by the simplest available method – usually involving the method of dimensionality reduction or approaches of reduction to the non-adhesive normal contact problem.
Geotechnics of Roads : Fundamentals
Presents stresses and strains in road structures, water and heat migration within and between layers of road materials, and the effects of water on the strength and stiffness of those materials. It includes a deep analysis of soil compaction, one of the most important issues in road construction. Compaction accounts for only a small proportion of a construction budget but its effects on the long-term performance of a road are decisive. In addition, the book describes methodologies for nondestructive road evaluation including analysis of continuous compaction control, a powerful technique for real-time quality control of road structures.
Generalized Plasticity
The book is divided into five major parts: 1. Yield function and choice; 2. Constitutive relation; 3. Slip-line Field Theory for plane strain problems, Characteristics Field Theory for plane stress problems and Characteristics Field Theory for spatial axisymmetrical problems; 4. Plastic zone analysis at crack tip and fracture criterion for mixed mode crack; 5. Limit loads and shakedown loads for pressure vessel. Examples of applications and problems are given for most chapters.
Fundamentals of Structural Dynamics : Theory and Computation
Emphasizes numerical methods, nonlinear response of structures, and the analysis of continuous systems (e.g., wave propagation). Fundamentals of Structural Dynamics: Theory and Computation builds the theory of structural dynamics from simple single-degree-of-freedom systems through complex nonlinear beams and frames in a consistent theoretical context supported by an extensive set of MATLAB codes that not only illustrate and support the principles, but provide powerful tools for exploration. The book is designed for students learning structural dynamics for the first time but also serves as a reference for professionals throughout their careers.
Finite Element Methods in Civil and Mechanical Engineering : A Mathematical Introduction
The finite element method is widely employed for numerical simulations in engineering and science due to its accuracy and efficiency. This concise introduction to the mathematical theory of the finite element method presents a selection of applications in civil and mechanical engineering including beams, elastic membranes, the wave equation, heat transfer, seepage in embankment, soil consolidation, incompressible fluids, and linear elasticity.
Facial wirkles and treating strategies
Skin is a complex organ covering the entire surface of the body. Skin aging is characterized by features such as wrinkling, loss of elasticity, laxity, and rough- textured appearance. This aging process is accompanied with phenotypic changes in cutaneous cells as well as structural and functional changes in extracellular matrix components such as collagens and elastin. These changes occur under the influence of intrinsic and extrinsic factors, Skin changes associated with aging are the focus of many surgical and nonsurgical procedures aimed to improve the appearance of skin...
Experimental analysis of nano and engineering materials and structures ; Proceedings of the 13th international conference on experimental mechanics, Alexandroupolis, Greece, July 1-6, 2007
ICEM13 focused on all aspects of experimental mechanics of solids with emphasis on mechanical characterization and testing at the micro and nano scale levels. The technical program of ICEM13 was the product of hard work and devotion of more than 100 world leading experts. This volume contains two-page abstracts of the 482 papers presented at ICEM13. The accompanying CD contains the full length papers. The abstracts of the fifteen plenary lectures are included in the beginning of the book. The remaining 467 abstracts are arranged in 23 tracks and 28 special symposia/sessions with 225 and 242 abstracts, respectively. The papers of the tracks have been contributed from open call, while the papers of the symposia/sessions have been solicited by the respective organizers.
Evolutionary Equations : Picard's Theorem for Partial Differential Equations, and Applications
This book provides a solution theory for time-dependent partial differential equations, which classically have not been accessible by a unified method. Instead of using sophisticated techniques and methods, the approach is elementary in the sense that only Hilbert space methods and some basic theory of complex analysis are required. Nevertheless, key properties of solutions can be recovered in an elegant manner.
Engineering mechanics 2 : Strength of materials : An introduction with many examples
Provides students with a clear introduction and to enable them to formulate and solve engineering problems in this field. For this purpose, the book provides a number of examples. The Contents : Introduction to linear elasticity – Plane stress state – Bars – Beams – Beam deflections – Shear stresses in beams – Torsion – Energy methods – Buckling of bars
Emulsion Science : Basic Principles
This book aims to give an overview of the most recent advances in emulsion sciene. The basic principles, covering aspects of emulsions from their preparation to their destruction, are presented in close relation to both the fundamental physics and the applications of these materials.
Elasticity of Transversely Isotropic Materials
This book aims to provide a comprehensive introduction to the theory and applications of the mechanics of transversely isotropic elastic materials. There are many reasons why it should be written. First, the theory of transversely isotropic elastic materials is an important branch of applied mathematics and engineering science; but because of the difficulties caused by anisotropy, the mathematical treatments and descriptions of individual problems have been scattered throughout the technical literature. This often hinders further development and applications. Hence, a text that can present the theory and solution methodology uniformly is necessary.
Elasticity and Plasticity of Large Deformations : An Introduction
The book presents in detail the used mathematical tools, such as tensor algebra and analysis. The general theory of mechanical behavior is particularized for the broad and important classes of elasticity and plasticity. The book is intended to bring the reader close to the fields of today's research activities. A list of notations and an index help the reader to find specific topics.
Elasticity and Plasticity of Large Deformations : An Introduction
The book offers a careful introduction to modern non-linear mechanics. The used mathematical tools, such as tensor algebra and analysis are given in detail. The general theory of mechanical behaviour is particularized for the broad and important classes of elasticity and plasticity. It is intended to bring the reader close to the fields of today's research activities. A list of notations and an index help the reader to find specific topics. The book is based on three decades of teaching experience in this field.
Discrete Element Analysis Methods of Generic Differential Quadratures
This book presents numerical differential quadrature (DQ) - based methods recently developed by the author. Their ability for solving generic scientific and engineering problems is demonstrated. These methods are the generic differential quadrature, the extended differential quadrature and the related discrete element analysis methods. These novel numerical techniques are both efficient and reliable. They are suitable for developing solution algorithms for various computational mechanics problems with arbitrarily complex geometry. This is shown for several comprehensive examples such as bars and beams, trusses, frames, general field problems, elasticity problems or bending of plates.
Dental gold alloys and gold nanoparticles for biomedical applications
Focuses on recent advances in dental gold alloys and gold nanoparticles (GNPs) for biomedical applications. Dental gold alloys combine several highly desirable mechanical properties, such as high strength, ductility, and elasticity, with an extremely robust chemical stability in the mouth.
Creep Mechanics ; 3rd ed.
The third edition of “Creep Mechanics” provides a short survey of recent advances in the mathematical modelling of the mechanical behavior of anisotropic solids under creep conditions, including principles, methods, and applications of tensor functions.
Continuum Mechanics using Mathematica® : Fundamentals, Applications and Scientific Computing
This book's methodological approach familiarizes readers with the mathematical tools required to correctly define and solve problems in continuum mechanics. The book covers essential principles and fundamental applications, and provides a solid basis for a deeper study of more challenging and specialized problems related to elasticity, fluid mechanics, plasticity, materials with memory, piezoelectricity, ferroelectricity, magneto-fluid mechanics, and state changes.
Continuum Mechanics
This book presents an introduction into the entire science of Continuum Mechanics in three parts. PART I: Continuum Mechanics introduces into the Foundations using tensors in Cartesian coordinate systems, classical theory of elasticity, and fluid mechanics. PART II: Mechanics of Materials has chapters on viscoelasticity, plasticity, principles of constitutive modelling, and thermodynamics. PART III presents Tensor Analysis and fundamental equations of Continuum Mechanics in curvilinear coordinates.
Contact Problems : The legacy of L.A. Galin
L.A. Galin's book on contact problems is a remarkable work. Actually there are two books: the first, published in 1953 deals with contact problems in the classical theory of elasticity; this is the one that was translated into English in 1961. The second book, published in 1980, included the first, and then had new sections on contact problems for viscoelastic materials, and rough contact problems; this section has not previously been translated into English.
Computer simulations in condensed matter : From materials to chemical biology ; Vol.2
This extensive and comprehensive collection of lectures by world-leading experts in the field introduces and reviews all relevant computer simulation methods and their applications in condensed matter systems. Volume 1, published as LNP 703 (ISBN 3-540-35270-8) is an in-depth introduction to a vast spectrum of computational techniques for statistical mechanical systems of condensed matter. It will enable the graduate student and both the specialist and nonspecialist researcher to get acquainted with the tools necessary to carry out numerical simulations at an advanced level. The present volume is a state-of-the-art survey on numerical experiments carried out for a great number of systems, ranging from materials sciences to chemical biology, such as supercooled liquids, spin glasses, colloids, polymers, liquid crystals, biological membranes and folding proteins.
